Harris · Crosby · Newport · Huffman · Lake Houston · FM 2100 346-586-5959 · Mon–Sat 7:00 AM – 6:00 PM

Crosby Sprinkler Repair

A Sheldon leak with a calm lawn

All zones off. If the meter moves, walk the yard before you open a trench.

Sprinkler Leak Detection in Sheldon is a local job: the grass, the clay, and the houses on those streets decide the repair. Sheldon sits west, toward the lake. Shade yards and open yards should not share a station.

West of Crosby. Name the cross street. Nearby landmarks: Sheldon, Lake Houston.

Sprinkler Leak Detection in Sheldon

Finding a leak in Crosby means separating irrigation from a high water table. The meter is the referee. Standing water is not.

All irrigation off, watch the meter. Movement means a main or a house leak. No movement until a station opens means that station. We mark one spot.

We will tell you if the wet is groundwater. Digging a hole that fills from the bottom is not a sprinkler repair, and you should not pay for it as one.

Grass, soil, and housing on this side of town

Grass. St. Augustine, oak shade St. Augustine wants a deep soak. Bermuda forgives a miss for a day. Mixing them on one valve is how one strip stays swampy and the other crunches.

Soil. Lake Houston clay west of Crosby Crosby’s high water table hides leaks and fills valve boxes. We use the meter before we dig a hole that fills itself.

Housing. Sheldon and the lake edge Typical irrigation failures here: shade versus sun, wet boxes, silt

All zones off. If the meter moves, walk the yard before you open a trench.

How a visit works

  1. Walk the yard We run every zone in Crosby. A dry strip, a mist, and a head that never comes up are three different repairs.
  2. Find the fault Heads, valves, underground pipe, and the low-voltage wire. Crosby gumbo stays wet. A soft yard is not a broken pipe until the meter says so.
  3. Repair We replace the part that failed. Spray heads stay with spray heads. Rotors stay with rotors.
  4. Set the timer Night watering, rest between cycles, rain sensor on. Noon misting is not a program.

Neighborhoods in Sheldon: Sheldon. Zip codes: 77044. County: Harris County.

Related sprinkler repair

If a head is sheared, start with sprinkler head repair. If a zone is dead, read sprinkler zone repair. A geyser or a main break is emergency sprinkler repair.

More on Sprinkler Leak Detection and lawn sprinkler repair in Sheldon. Local page: Sprinkler Leak Detection in Sheldon.

What this looks like on the ground

All zones off. If the meter moves, walk the yard before you open a trench. That is the Sheldon version of the job — not a copied paragraph from another city. Neighborhoods we actually roll to: Sheldon.

Related reading on this street type: Sprinkler Valve Repair and Rain Sensor Repair. If you are in Crosby instead, start at sprinkler repair in Crosby.

What we usually find

  • Meter moving with the system off
  • Always-soft flower bed
  • Ditch that stays charged
  • Hiss at the backflow
  • Bill jumped after a dry month
  • Wet pier-and-beam skirt

Questions we get on this job

Do you repair this in Crosby?

Yes. Call 346-586-5959 or send the form. We come to the house.

Will you replace the whole system for one failure?

Not if the rest of the zone is sound. We say so when the pipe is actually done.

How do I shut it off if water is in the street?

Close the two handles on the backflow at the house, then call 346-586-5959.

Keep reading (different streets, different repairs)

Crosby Sprinkler Repair repairs lawn sprinklers in Crosby, Newport, Huffman, Barrett, Highlands, and the Lake Houston terrace. Call 346-586-5959 or schedule a visit.

Also see how a repair visit works, FAQ, systems we repair, and all cities we serve.

Crosby Sprinkler Repair · 346-586-5959

Service map

Cities we serve around Crosby

Pins are the cities we come to. There is no shop to visit. Open a pin for that city page.

Crosby lawns · wet ground · repair that is actually a leak

Fix what failed.

Crosby Sprinkler Repair fixes lawn sprinklers in Crosby, Newport, Huffman, and along FM 2100. Heads, valves, silted pipe, and timers.

Call 346-586-5959 Schedule a visit

Request Service